Custom Bg


VRS Quick Clips

Product Instructions

Quick Jump To:

Quick Setup Overview

Turn cam buckle upside down as shown in the picture above.

  1. Insert "anchoring" end of suspension strap into cam buckle
  2. Pull suspension strap cam buckle through cam buckle about 6 inches.
  3. Insert suspension strap through top of VRS clip, 3) and back into cam buckle.
  4. Pull anchoring end of suspension strap through bottom sliver in cam buckle.


  1. Firmly press down cam lock to secure suspension strap. NOTE: Pull on VRS Clip an suspension strap to ensure cam buckle is secured in place.


Setup for use with Resistance Band


  1. Locate VRS Clip with anchoring eyelet at the top.
  2. Remove bolts from both VRS Clips and insert desired resistance bands as shown.
  3. Attach carabiner to VRS Clip eyelet (Not shown in this example, see below for example).
  4. Repeat steps to setup second suspension strap (Not Shown).
  5. Attach carabiner to door anchor(Not Shown).


Setup for use with Suspension Band


  1. Locate VRS Clip with anchoring eyelet at top.
  2. Using only one VRS Clip, remove bolts from VRS Clips and insert anchoring end of suspension band around bolt, and back through cam buckle, as described previously in Quick Setup Overview: Step 4
  3. Attach carabiner to VRS Clip eyelet.
  4. Repeat steps to setup second suspension strap (Not Shown).
  5. Attach carabiner to door anchor(Not Shown).